Large Format Doctor / Salvage rewinder.
|Roll width options||1000mm (40")
|Roll diameter options||600mm (24")
|Maximum speed options||300 m/min (1000 ft/min)
450 m/min (1500 ft/min)
600 m/min (2000 ft/min)
1000 m/min (3300 ft/min)
|Options available||Trim/centre trim removal (razor, shear or crush)
Vacuum trim extraction
Razor or Shear slitting plus bowed roller
Coned unwind shaft for processing rolls with crushed cores
Shaft supports for processing heavy rolls
Perimeter safety guards (compulsory in Europe)
Splice table/illuminated inspection table
Customised centre-module for customers' process
The Universal X2 shaftless rewinding machine incorporates the latest closed loop tension control to ensure it produces finished reels of the highest quality. The machine has been specifically designed to process tension sensitive substrates. The shaftless design allows easy loading and unloading of reels. The machine is reversible to allow print direction to be corrected without the need to unload and re-load the roll.
The Converter Guide 4 Digital web guiding system is simple to set up, and utilised AC Servo technology, with encoder feedback to give the ultimate guiding performance. With a rewinding machine the finish roll edge profile is sometimes controlled by the guider (rather than a slit knife) therefore this is a key area of the machine. The guider corrects at speeds up to 100mm per second. The controls for the guider are fully integrated with the machine controls.